Brake Caliper Paint
|
- Description
- Fitting Guide
- Reviews
This brake caliper and engine bay paint is a lead free formula.
It is a one part paint system which requires no mixing with hardeners or priming and is therefore easy to use with no mess.
It is easy to apply, quick drying and has a high quality, long lasting lustre finish which will enhance your vehicles brake calipers, wheel hubs or engine bay.
Resistant to brake dust, chemicals, corrosion and oil. Available in a choice of colours including silver, red, blue, gold, yellow, green, orange, white and black.
Please note - due to shipping restrictions, we are unable to supply this product to International Customers.
- Remove wheels from vehicle, following manufacturer's guidelines carefully.
- Using a steel brush, remove any loose dirt, grime or rust from the surface.
- Clean the brake parts with the cleaner provided - removing all traces of dirt, grease, dust, brake fluid, oil and any other moisture.
- Ideally calipers or drums should be removed for painting, although we strongly recommend masking up of brake hoses, bleed screws and other rubber surrounding components.
- Open paint tin and stir thoroughly.
- Ensure surface is totally dry before painting commences.
- Provide a thin layer of paint initially and avoid runs and deposits.
- Allow to dry for 30mins, then apply a second coat. Repeat process until an even, solid effect is achieved.
- Allow to dry thoroughly for at least 2 hours, before refitting to vehicle. Do not drive vehicle for 24hours, if possible, to allow the paint to totally dry and harden.
Follow us