- Description
- Fitting Guide
- Reviews
The eye-catching lines of Adamesh grilles are guaranteed to make your Jaguar stand out from the crowd.
Add a gleaming touch of refinement with this upper mesh grille complete with Jaguar logo and matching lower mesh grilles, made from high quality electro-polished, hand-woven stainless steel mesh which will not rust or chip and maintains a highly-reflective finish.
This upper mesh grille is designed to fit perfectly into your existing chrome grille surround while the 5 lower grilles fit neatly into the bumper apertures.
Available with a choice of 3 different badge and plinth combinations - as standard the grille comes complete with the large badge and plinth (as shown in picture), however if you require an alternative, remove the plinth from the drop down option below, and select one of the alternatives from our related products at the bottom of the page.
The grilles will fit all Jaguar XJ X351 models. Once the bumper is removed it is easy to install, requiring only a simple modification to the existing grille by unclipping the plastic mesh from inside the frame. The lower grilles fit easily into the bumper and are secured with clips and screw fixings.
Full fitting instructions are provided.
Fitment for each grille differs, and is as follows
Lower Centre Grille
- Remove the original plastic grille from the centre of the bumper by removing clips from behind the grille.
- Place the new mesh grille in the bumper opening from the rear and secure in position with the 5 metal clips (supplied) and 2 self tapping screws at each end. 4 clips along the top and 1 in the centre at the bottom.
- The 2 small metal hooks on the top of the grille will prevent the grille going too far forward.
Lower Outer Grilles
- Position each of the smaller grilles above and below the chrome blade.
- Secure in position with black self-tapping screws into the plastic of the bumper.
Upper Centre Grille
- Remove the grille from the bumper by the 2 fixing points at either side of the grille surround on the rear
- Next remove the chrome edging strip from around the plastic mesh, there are clips around the out side that you need to unclip with a screw driver.
- Insert the new mesh grille from behind the chrome edging and fix in position, the mesh insert has cut outs in the mesh to match the clips and moldings of the chrome surround. It is held in place by pressure and also the existing clips in the surround used to hold the original plastic mesh.
- Re-attach chrome edging strip complete with new mesh to the bumper.
- Attach badge and plinth to mesh if required and fix bumper back onto car.
Follow us